JATROPHA OIL WITH IRON NANOPARTICLES APPLICATION IN DRILLING PROCESSES

Authors

  • Veikko Shalimba University JE Purkyne
  • Vít Sopko

DOI:

https://doi.org/10.14311/AP.2019.59.0299

Keywords:

Jatropha oil, nanofluids, nanoparticles, temperature, drilling

Abstract

A performance of heat transfer fluids has a substantial influence on the size, weight and cost of heat transfer systems, therefore, a high-performance heat transfer fluid is very important in many industries. Over the last decades, nanofluids have been developed. According to many researchers and publications on nanofluids, it is evident that nanofluids have a high thermal conductivity. The aim of this experimental study was to investigate the change of the workpiece temperature during drilling using Jatropha oil with iron nanoparticles and water with iron nanoparticles as lubricating and cooling fluids. These experiments were carried out with samples of nanofluid with different nanoparticles volume ratio, such as samples JN1, JN5 and JN10 of iron nanoparticles in the base Jatropha oil with a nanoparticle volume fraction of 1 %, 5% and 10% respectively and samples WN1, WN5 and WN10 of iron nanoparticles in the base water with a nanoparticle volume fraction of 1 %, 5% and 10% respectively.

Downloads

Download data is not yet available.

Downloads

Published

2019-07-01

Issue

Vol. 59 No. 3 (2019)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

4. ddd

How to Cite

Shalimba, V., & Sopko, V. (2019). JATROPHA OIL WITH IRON NANOPARTICLES APPLICATION IN DRILLING PROCESSES. Acta Polytechnica, 59(3), 299-304. https://doi.org/10.14311/AP.2019.59.0299