OPTIMIZATION OF A SMALL SOLAR CHIMNEY

Authors

  • Janaina Oliveira Castro Silva Department of Mechanical Engineering, Pontifical Catholic University of Minas Gerais (PUC Minas), Av. Dom José Gaspar, 500. Belo Horizonte, Brasil. 30535-901
  • Cristiana Brasil Maia Department of Mechanical Engineering, Pontifical Catholic University of Minas Gerais (PUC Minas), Av. Dom José Gaspar, 500. Belo Horizonte, Brasil. 30535-901 http://orcid.org/0000-0002-2188-9596

DOI:

https://doi.org/10.14311/AP.2020.60.0225

Keywords:

Solar chimney, optimization, conjugate directions, variable metric

Abstract

An optimization study to maximize the exergy efficiency of a small-scale solar chimney was carried out. Optimization variables include collector diameter (Dc), collector height (Hc), tower height (Ht), and tower diameter (Dt). Models from the literature were used to predict environmental and airflow parameters. Exergy efficiency and solar chimney efficiency were determined, on an hourly basis, for a one-year period. The model was simulated using the EES software. Two methods of optimization were used, the method of conjugate directions and the method of variable metric, both providing similar results. Results were compared to the results from an experimental prototype, and it was found that the energetic and exergetic efficiency were significantly improved. The analysis indicated that the height and diameter of the chimney and collector are the most important physical variables in the design of a solar chimney. For both methods, it was found that the maximum exergy efficiency was obtained with a collector height of 0.5 m, a collector diameter of 30 m, a tower diameter of 1 m, and a tower height of 17.8 – 18.8 m. The exergy efficiency was 44 %.

Downloads

Download data is not yet available.

Author Biographies

  • Janaina Oliveira Castro Silva, Department of Mechanical Engineering, Pontifical Catholic University of Minas Gerais (PUC Minas), Av. Dom José Gaspar, 500. Belo Horizonte, Brasil. 30535-901
    Department of Mechanical Engineering
  • Cristiana Brasil Maia, Department of Mechanical Engineering, Pontifical Catholic University of Minas Gerais (PUC Minas), Av. Dom José Gaspar, 500. Belo Horizonte, Brasil. 30535-901
    Department of Mechanical Engineering

Downloads

Published

2020-07-01

Issue

Vol. 60 No. 3 (2020)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

4. ddd

How to Cite

Castro Silva, J. O., & Maia, C. B. (2020). OPTIMIZATION OF A SMALL SOLAR CHIMNEY. Acta Polytechnica, 60(3), 225-234. https://doi.org/10.14311/AP.2020.60.0225