THE INFLUENCE OF FRICTION STIR WELDED PROCESS PARAMETERS OF AA2519-T62 ON JOINT QUALITY DEFINED BY NON-DESTRUCTIVE LASER AMPLIFIED ULTRASONIC METHOD AND BY MICROSTRUCTURE ANALYSIS
DOI:
https://doi.org/10.14311/AP.2020.60.0415Keywords:
Friction Stir Welding, aluminum alloys, microstructure analysis, laser ultrasonic structuroscopy, non-destructive testingAbstract
The presented research contains a description of a non-destructive laser ultrasound internal structure analysis of aluminium joints made by friction stir welding. In the research, four selected technological parameter groups were taken into account. Modifications used in different parameter groups included changing tool traverse speeds and also its rotation speeds. The most important goal of this research was to determine the joint quality using a non-destructive laser amplified ultrasound method To verify obtained test results, an additional microstructural analysis was also conducted.
Downloads
References
MISHRA, R.S.; MAHONEY, M.W., Friction Stir Welding and Processing; ASM International: Materials Park, OH, USA, 2007; ISBN 978-0-87170-840-3.
RAO, C.V., REDDY, G.M., RAO, K.S., Microstructure and pitting corrosion resistance of AA2219 Al-Cu alloy friction stir welds - Effect of tool profile. Def. Technol. 2015, 11, 123-131.
https://doi.org/10.1016/j.dt.2014.10.003
BABU, S.; ELANGOVAN, K.; BALASUBRAMANIAN, V., Optimizing friction stir welding parameters to maximize tensile strength of AA2219 aluminium alloy joints. Met. Mater. Int. 2009, 15, 321-330.
https://doi.org/10.1007/s12540-009-0321-3
SABARI, S.S.; MALARVIZHI, S.; BALASUBRAMANIAN, V., Characteristics of FSW and UWFSW joints of AA2519-T87 aluminium alloy: Effect of tool rotation speed. J. Manuf. Process. 2016, 22, 278-289.
https://doi.org/10.1016/j.jmapro.2016.03.014
KOSTUREK, R.; WACHOWSKI, M.; ŚLĘZAK, T.; ŚNIEŻEK, L.; MIERZYŃSKI, J.; SOBCZAK, U., Research on the friction stir welding of Titanium Grade 1. In Proceedings of the International Conference on Advanced Functional Materials and Composites (ICAFMC2018), MATEC Web of Conferences 242, Barcelona, Spain, 5-6 September 2018.
https://doi.org/10.1051/matecconf/201824201006
ZHANG, Z.; XIAO, B.L.; MA, Z.Y., Effect of welding parameters on microstructure and mechanical properties of friction stir welded 2219Al-T6 joints. J. Mater. Sci. 2012, 47, 4075-4086.
https://doi.org/10.1007/s10853-012-6261-1
LIANG, X.P.; LI, H.Z.; LI, Z.; HONG, T.; MA, B.; LIU, S.D.; LIU, Y., Study on the microstructure in a friction stir welded 2519-T87 Al alloy. Mater. Des. 2012, 35, 603-608.
https://doi.org/10.1016/j.matdes.2011.10.009
FISHER, J., JAMES, J., Aluminum alloy 2519 in military vehicles. Mater. Sci. Forum 2002, 160, 43-46.
WU, Y.P., YE, L.Y., JIA, Y., LIU, L., ZHANG, X.M., Precipitation kinetics of 2519A aluminum alloy based on aging curves and DSC analysis. Trans. Nonferrous Metal. Soc. China 2014, 24, 3076-3083.
https://doi.org/10.1016/S1003-6326(14)63445-2
SCHAER, G.B., SERCOMBE, T.B., LUMLEY, R.N., Liquid phase sintering of aluminium alloys. Mater. Chem. Phys. 2001, 67, 85-91.
https://doi.org/10.1016/S0254-0584(00)00424-7
STOICHEV, N.V., YANEVA, S.B., REGEL, L.L., VIDENSKIY, I.V., Eutectic solidification of Al-Cu alloys influenced by convection. Adv. Space Res. 1998, 8, 171-174.
https://doi.org/10.1016/0273-1177(88)90020-8
GÜNDÜZ, M.; ÇADIRLI, E., Directional solidification of aluminium-copper alloys. Mater. Sci. Eng. A Struct. 2002, 327, 167-185.
https://doi.org/10.1016/S0921-5093(01)01649-5
XU,W.F.; LIU, J.H.; CHEN, D.L.; LUAN, G.H., Low-cycle fatigue of a friction stir welded 2219-T62 aluminium alloy at different welding parameters and cooling conditions. Int. J. Adv. Manuf. Technol. 2014, 74, 209-218.
https://doi.org/10.1007/s00170-014-5988-z
KOSTUREK, R.; ŚNIEŻEK, L.; WACHOWSKI, M.; TORZEWSKI, J., The Influence of Post-Weld Heat Treatment on the Microstructure and Fatigue Properties of Sc-Modified AA2519 Friction Stir-Welded Joint. Materials 2019, 12, 583.
https://doi.org/10.3390/ma12040583
KOSTUREK, R., ŚNIEŻEK, L., TORZEWSKI, J., WACHOWSKI, M., Research on the Friction Stir Welding of Sc-Modified AA2519 Extrusion. Metals 2019, 9, 1024.
https://doi.org/10.3390/met9101024
KOSTUREK, R., ŚNIEŻEK, L., TORZEWSKI, J., WACHOWSKI, M., Research on the friction stir welding of Sc-modified AA2519 extrusion, Metals, Volume 9, Issue 10, October 2019, Article number 1024, https://doi.org/10.3390/met9101024
STOLLER, J., ZEZULOVA, E., Use of ultrasound-The ultrasonic pulse velocity method for the diagnosis of protective structures after the load of TNT explosion, pp. 230-235 in ICMT 2017 - 6th International Conference on Military Technologies. https://doi.org/10.1109/MILTECHS.2017.7988761
SVOBODA, P., KRAVCOV, A., POSPÍCHAL, V., MOROZOV, N., ZEZULOVÁ, E., Quality assessment of bored pile foundations by a set of non-destructive testing methods, ICMT 2019 - International Conference on Military Technologies 2019. Brno https://doi.org/10.1109/MILTECHS.2019.8870062
ŠTOLLER J., DVORAK P., Ultrasound Diagnosis of Protective Structures after Contact Explosion. In: Transport Means 2014. Kaunas, Lithuania: Kaunas University of Technology, Lithuania, 2014, p. 264-267. ISSN 2351-4604
Janusz Kluczyński, Lucjan Śnieżek, Alexander Kravcov, Krzysztof Grzelak, Pavel Svoboda, Ireneusz Szachogłuchowicz, Ondřej Franek, Nikolaj Morozov, Janusz Torzewski, Petr Kubeček, The Examination of Restrained Joints Created in the Process of Multi-Material FFF Additive Manufacturing Technology, Materials 2020, 13(4), 903; https://doi.org/10.3390/ma13040903
QUINTERO R., SIMONETTI F., SELLINGER A., Noncontact laser ultrasonic inspection of Ceramic Matrix Composites (CMCs), NDT & E International 88, 8-16, 2017
https://doi.org/10.1016/j.ndteint.2017.02.008
KRAVCOV, A., SHIBAEV, I., "Examination of structural members of aerial vehicles by laser ultrasonic structuroscopy," International Journal of Civil Engineering and Technology, vol. 9, issue 11, pp. 2258-2265, November 2018.
KRAVCOV, A., PLATEK, P., POSPICHAL, V., KOPERSKI, W., Internal structure research of 3D printed cellular structures by laser-ultrasonic structuroscopy, ICMT 2019 - International Conference on Military Technologies 2019. Brno, https://doi.org/10.1109/MILTECHS.2019.8870047
Downloads
Published
Issue
Section
License
Copyright (c) 2020 Alexander Kravcov, Robert Kosturek, Lucjan Śnieżek, Janusz Kluczyński, Ondřej Franek, Nikolaj Morozov, Pawel Maciejewski
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
4. ddd
